ARTHUR HOLM DynamicTabLift 사용자 설명서 - 페이지 6

{카테고리_이름} ARTHUR HOLM DynamicTabLift에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARTHUR HOLM DynamicTabLift 20 페이지.

SAFETY INSTRUCTIONS

Wiring connected to hazardous voltage requires installation by

qualified personnel or the use of ready-made flexible cables.

For your security, your equipment must be connected to an

electrical outlet with grounding connection protection.

Since the plug is used to disconnect the device, the operating

electrical outlet must be in an easily accessible place.

Environment

• Install the equipment on an elevated, flat surface.

• Install the equipment in a ventilated area.

• Avoid exposing the equipment to:

∙

Rain or water

∙

Excessive heat, cold or humidity

∙

Area exposed to direct sunlight

∙

Dirty areas

∙

Equipment generating strong magnetic fields

• Avoid placing open containers of liquid, near the equipment.

• Keep a minimum distance of 30 mm in order to have good ventilation.

• Never place above the device any sources of flames such as lighted

candles, etc.

• If you are using the device in extreme weather conditions and/or

tropical climates, the equipment should be installed in a room which

ensures a reasonable level of temperature and humidity.

• To prevent damage the equipment must be firmly anchored to the

surface, as shown on the installation instructions.