dji Cendence Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} dji Cendence. dji Cendence 20 pages.
Également pour dji Cendence : Manuel de l'utilisateur (7 pages)

Imprimer la page

Remote Controller Operations

Button Types

Users can use the preconfigured buttons to control the aircraft and the camera and can also assign

functions to the customizable buttons through the DJI GO 4 app. There are three types of button:

1. Preconfigured buttons for aircraft control, e.g. the Pause Button, RTH Button, etc.

2. Preconfigured buttons for camera control, e.g. the Shutter Button, Recording Button, Focus

Adjustment Knob, etc.

3. Customizable buttons and knobs that you can set through the DJI GO 4 app.

Turning the Remote Controller On and Off

Follow the steps below to turn the remote controller on and off.

1. Press the power button once to check the current battery level. Charge the remote controller if

the battery is too low.

2. Next, press and hold the Power button to power on the remote controller.

3. Repeat step 2 to power off the remote controller after you finish using it.

Linking the Remote Controller

Linking is only required when using for the remote controller for the first time. Follow these steps to

link a remote controller:

1. Power on the remote controller, connect to your mobile device, and launch DJI GO 4.

2. Power on the aircraft.

3. Enter the Camera View and tap the Linking Remote Controller button shown below.

4. The DJI GO 4 app will display a countdown box, the remote controller will be ready to link, with

its display showing Connecting and a beeping sound being emitted.