dji Cendence Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} dji Cendence. dji Cendence 20 pages.
Également pour dji Cendence : Manuel de l'utilisateur (7 pages)

Imprimer la page

Customizable Buttons

Go to the Customizable Button Settings Menu in DJI GO 4. Here you can set functions for the left

lever, right lever, C1-C4 buttons, and BA-BH buttons.

Dual Remote Controller Mode

More than one remote controller can connect to the same aircraft in Dual Remote Controller mode.

The Master remote controller operator controls the orientation of the aircraft, while the Slave remote

controller controls the movement of the gimbal and camera operation. Master and Slave remote

controllers communicate each other via Wi-Fi.

In Dual Remote Controller Mode, when the Master remote controller is primary, it can

control gimbal pitch and pan. When the Slave remote controller is primary, it can control

gimbal pitch, pan, and roll.

Dual Remote Controller mode is not available in Russia and Israel.

Setting Up Dual Remote Controller Mode

Dual Remote Controller mode is disabled by default. Users must enable this feature on the Master

remote controller via DJI GO 4. Follow the steps below to setup:

Master Remote Controller:

1. Connect the remote controller to your mobile device and launch DJI GO 4.

2. Go to the Camera View and tap

3. Select Master and set the remote controller as the Master remote controller.

4. Enter the connection password for the Slave remote controller.

to enter the remote controller settings window.

Remote Controller Settings

Master and Slave

Set Remote Controller Status

Master ID: 28172d

Connection Status:ON

Remote Controller Calibration

OFF

Master

Slave ID: 14f93f

Authorization Code:

666666

Cendence User Guide

Slave