dji Zenmuse X5 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} dji Zenmuse X5. dji Zenmuse X5 11 pages. For inspire 1 pro
Également pour dji Zenmuse X5 : Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (11 pages), Manuel de l'utilisateur (18 pages), Manuel de l'utilisateur (18 pages)

In order to get a good IMU calibration the drone should not be hot, so it should never be done after the drone has

been running. The aircraft should have been switched off for at least ten minutes and ideally be in a cool location

such as an air-conditioned room or in a cool climate. The drone should be placed somewhere stable and ideally a

spirit level placed across from motor to motor to check for perfect level. Each foot can be adjusted by placing pieces

of paper underneath until perfect level is achieved. Once level the IMU calibration should be started as soon as

possible after switching on the drone and then there should be no movement of the drone during the calibration

process.

Once complete the IMU calibration should be good until the next firmware update or the airframe is exposed to large

forces.

3. Check Sensors every flight

So with points 1 & 2 in mind you shouldn't need to calibrate anything prior to each flight, however it is very important

to check what the sensors are reading and understand if you do need to take action.

With the drone powered up and the DJI app running you can navigate to the MC Settings page and then scroll down

and select the Sensors view that should look like the image below.