Artidor AR-077 Series Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Artidor AR-077 Series. Artidor AR-077 Series 16 pages. Explosion-safe signal lights

Imprimer la page

Light source

The signal light can be supplied in two different basic types: Strobe Flashing or Steady Burn each with

their own specific type of light source as described below.

Xenon lamp (flashing light)

The strobe flashing light contains an electronic printed circuit board with a xenon gas filled lamp.

When operating it produces bright flashes of light with the energy of 5 Joules at a frequency of

approximately 60 flashes per minute. The printed circuit board has a small potentiometer with which

the flash frequency can be changed within the range of approximately 50 to 80 flashes per minute.

Multi-LED reflex lamp (steady burn or blinking status light)

The steady burn or blinking status light contains electronics with a multi-LED reflex lamp.

Light color

The color of the Xenon flashing light is obtained by inserting a color-fast lens. In case of the Multi-LED

reflex lamp, the color is created by using colored LED's. In both cases a stable color is obtained.

Supply voltage

With regard to the voltage from the power supply the signal can be supplied for the following voltages.

All the other electrical data is also given in the table.

User manual explosion-safe AR-077 signal light

Issue April 2020

Voltage

24V = 24 V AC/DC

48V = 48 V AC/DC

60V = 60 V AC/DC

115V = 115 V AC/DC

230V = 230 V AC

Light Source

XE = Xenon

LED = LED's

Material

1 = aluminum anodized

Mounting Bracket

1 = with bracket

Version

0 = factory sealed cable (Ex d)

2 = connection terminals + cable gland (Ex de)

Model type designation

4 / 16