Artidor AR-077 Series Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt oświetleniowy Artidor AR-077 Series. Artidor AR-077 Series 16 stron. Explosion-safe signal lights
Drukuj stronęa.
Light source
The signal light can be supplied in two different basic types: Strobe Flashing or Steady Burn each with
their own specific type of light source as described below.
Xenon lamp (flashing light)
The strobe flashing light contains an electronic printed circuit board with a xenon gas filled lamp.
When operating it produces bright flashes of light with the energy of 5 Joules at a frequency of
approximately 60 flashes per minute. The printed circuit board has a small potentiometer with which
the flash frequency can be changed within the range of approximately 50 to 80 flashes per minute.
Multi-LED reflex lamp (steady burn or blinking status light)
The steady burn or blinking status light contains electronics with a multi-LED reflex lamp.
b.
Light color
The color of the Xenon flashing light is obtained by inserting a color-fast lens. In case of the Multi-LED
reflex lamp, the color is created by using colored LED's. In both cases a stable color is obtained.
c.
Supply voltage
With regard to the voltage from the power supply the signal can be supplied for the following voltages.
All the other electrical data is also given in the table.
User manual explosion-safe AR-077 signal light
Issue April 2020
Voltage
24V = 24 V AC/DC
48V = 48 V AC/DC
60V = 60 V AC/DC
115V = 115 V AC/DC
230V = 230 V AC
Light Source
XE = Xenon
LED = LED's
Material
1 = aluminum anodized
Mounting Bracket
1 = with bracket
Version
0 = factory sealed cable (Ex d)
2 = connection terminals + cable gland (Ex de)
Model type designation
4 / 16