djpower H-2VD Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} djpower H-2VD. djpower H-2VD 19 pages.

Fog Machine H-2VD

2. Connection

2.1.1. Electrical Connection

Connect the device to the mains using the supplied power cable! The

protective earth must always be connected!

Cable (EU)

Brown

Blue

Green/ Yellow

2.1.2. DMX connection

Make sure you always use shielded cables. 3pin or 5pin XLR cables are

suitable for this.

2.1.3. DMX connection with terminator

For installations where the DMX signal has to bridge a large distance or where

the device is to be operated in an environment with increased

electromagnetic radiation, such as a discotheque, we recommend using a

DMX terminator. This prevents the digital control signal from being corrupted

by electrical noise. The DMX terminator is simply an XLR connector with a

120Ω resistor between pins 2 and 3, which is then plugged into the XLR output

jack of the last fixture in the chain. Please see the drawings below.

Cable (US)

Black

White

Green

7 / 18

Live

Neutral

Earth

International