djpower H-2VD 사용자 설명서 - 페이지 7

{카테고리_이름} djpower H-2VD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. djpower H-2VD 19 페이지.

Fog Machine H-2VD

2. Connection

2.1.1. Electrical Connection

Connect the device to the mains using the supplied power cable! The

protective earth must always be connected!

Cable (EU)

Brown

Blue

Green/ Yellow

2.1.2. DMX connection

Make sure you always use shielded cables. 3pin or 5pin XLR cables are

suitable for this.

2.1.3. DMX connection with terminator

For installations where the DMX signal has to bridge a large distance or where

the device is to be operated in an environment with increased

electromagnetic radiation, such as a discotheque, we recommend using a

DMX terminator. This prevents the digital control signal from being corrupted

by electrical noise. The DMX terminator is simply an XLR connector with a

120Ω resistor between pins 2 and 3, which is then plugged into the XLR output

jack of the last fixture in the chain. Please see the drawings below.

Cable (US)

Black

White

Green

7 / 18

Live

Neutral

Earth

International