djpower TOPCAT H-X3 DMX Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} djpower TOPCAT H-X3 DMX. djpower TOPCAT H-X3 DMX 13 pages. Automatic dry ice machine

Imprimer la page

•

When the power is OFF, open the upper cover to add water till the recommended level as shown in the right picture. Water

Tank capacity is Appr. 32L.

•

Always connect the product to a grounded circuit. Before power on, make sure it is connected with the rated voltage.

•

The unit has a main power input and an auxiliary power input with 3,000W respectively. The main power input supplies to

the heater and control circuits while the auxiliary power supply only provides power to the heater. Hence the main power

source must be connected when using the unit.

With main power and auxiliary power together, it takes about 27 minutes to reach the optimal operating temperature.

If operating the unit with main power only, heating times will be longer.

•

Open the upper cover, add no more than 13 kg of dry ice to the basket, and lock the cover tightly.

Add dry ice when using the machine to avoid waste of dry ice.

H-X3 provides dry ice storage function: even when the machine is heated, dry ice can be stored temporarily for

hours for next uses.

In order to achieve the desired effect, please place the dry ice in the built-in basket. At this time, please do not take out the dry

ice basket to avoid serious personal injury.

4.2

On-device Control Mode & Operation

To access the control panel functions, use the four buttons located underneath the LCD display.

Button

<MENU>

▲

<TIMER>

▼ <VOLUME>

Function

Switch menu pages to select a function

Increases the numeric value of current function

Trigger TMER output mode

Decreases the numeric value of current function

Trigger Manual output mode

Save settings

STOP turns the fog output off

- 7 -