djpower TOPCAT H-X3 DMX Kullanıcı Kılavuzu - Sayfa 8
Buz Yapıcı djpower TOPCAT H-X3 DMX için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. djpower TOPCAT H-X3 DMX 13 sayfaları. Automatic dry ice machine
Sayfayı Yazdır•
When the power is OFF, open the upper cover to add water till the recommended level as shown in the right picture. Water
Tank capacity is Appr. 32L.
•
Always connect the product to a grounded circuit. Before power on, make sure it is connected with the rated voltage.
•
The unit has a main power input and an auxiliary power input with 3,000W respectively. The main power input supplies to
the heater and control circuits while the auxiliary power supply only provides power to the heater. Hence the main power
source must be connected when using the unit.
With main power and auxiliary power together, it takes about 27 minutes to reach the optimal operating temperature.
If operating the unit with main power only, heating times will be longer.
•
Open the upper cover, add no more than 13 kg of dry ice to the basket, and lock the cover tightly.
Add dry ice when using the machine to avoid waste of dry ice.
H-X3 provides dry ice storage function: even when the machine is heated, dry ice can be stored temporarily for
hours for next uses.
In order to achieve the desired effect, please place the dry ice in the built-in basket. At this time, please do not take out the dry
ice basket to avoid serious personal injury.
4.2
On-device Control Mode & Operation
To access the control panel functions, use the four buttons located underneath the LCD display.
Button
<MENU>
▲
<TIMER>
▼ <VOLUME>
<ENTER> <STOP>
Function
Switch menu pages to select a function
Increases the numeric value of current function
Trigger TMER output mode
Decreases the numeric value of current function
Trigger Manual output mode
Save settings
STOP turns the fog output off
- 7 -