Artison RCC600-SM Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Artison RCC600-SM. Artison RCC600-SM 13 pages. Subwoofer module | freestanding subwoofer | subwoofer amplifier | cabinet mount
Également pour Artison RCC600-SM : Manuel d'installation (19 pages)

Imprimer la page

POWER MODES

1. Select either:

ON – Always On.

AUTO – On with Signal Sense, without signal it will stay on for ≈15 minutes.

TRIGGER – On with a 12 Volt trigger.

2. +12V Trigger Input – Use the Green Phoenix Connector to connect a 12 volt trigger wire

from your other equipment, the polarity on the connector can be either way.

SETUP MODES

1. EQ – Select the appropriate setting based on these guidelines:

∞

Baffle – The RCC 600 Subwoofer Module is installed in a wall that has an air

volume of ≥2.8 ft

CLOSED BOX – The RCC 600 Subwoofer Module is installed in an Artison

IMPORTANT: In an installation of two RCC600-SM's that are being powered by one

RCC600-SA, both Subwoofer Modules need to be in either Pre-Build Boxes or be in

Infinite Baffles. You cannot connect two RCC 600 Subwoofer Modules that are in

different environments to the same RCC 600 Subwoofer Amplifier.

PHASE – Comes from the factory set at 0°. The phase of the subwoofer can be adjusted

Pre-Build Box.