Artison RCC600-SM 설치 매뉴얼 - 페이지 10
{카테고리_이름} Artison RCC600-SM에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Artison RCC600-SM 13 페이지. Subwoofer module | freestanding subwoofer | subwoofer amplifier | cabinet mount
Artison RCC600-SM에 대해서도 마찬가지입니다: 설치 매뉴얼 (19 페이지)
페이지 인쇄POWER MODES
1. Select either:
ON – Always On.
AUTO – On with Signal Sense, without signal it will stay on for ≈15 minutes.
TRIGGER – On with a 12 Volt trigger.
2. +12V Trigger Input – Use the Green Phoenix Connector to connect a 12 volt trigger wire
from your other equipment, the polarity on the connector can be either way.
SETUP MODES
1. EQ – Select the appropriate setting based on these guidelines:
∞
Baffle – The RCC 600 Subwoofer Module is installed in a wall that has an air
volume of ≥2.8 ft
CLOSED BOX – The RCC 600 Subwoofer Module is installed in an Artison
IMPORTANT: In an installation of two RCC600-SM's that are being powered by one
RCC600-SA, both Subwoofer Modules need to be in either Pre-Build Boxes or be in
Infinite Baffles. You cannot connect two RCC 600 Subwoofer Modules that are in
different environments to the same RCC 600 Subwoofer Amplifier.
2.
PHASE – Comes from the factory set at 0°. The phase of the subwoofer can be adjusted
3
.
Pre-Build Box.
10