Altusen Altusen KH-0116 Guide de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Guide de démarrage rapide pour {nom_de_la_catégorie} Altusen Altusen KH-0116. Altusen Altusen KH-0116 1 pages.

Imprimer la page

Online Registration

International:

• http://support.aten.com

North America:

• http://www.aten-usa.com/product_registration

Technical Phone Support

International:

• 886-2-8692-6959

China:

KH0116 High Density KVM Switch Quick Start Guide

• 86-10-5255-0110

Japan:

• 81-3-5323-7178

International Co., Ltd. www.aten.com

Korea:

• 82-2-467-6789

Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd.

North America:

• 1-888-999-ATEN Ext: 4988

PAPE-1214-400G Printing Date: 07/2010

United Kingdom:

This product is RoHS compliant

• 44-8-4481-58923

Package Contents

The complete KH0116 package consists of:

1 KH0116 KVM Switch

2 Custom KVM Cable Set

1 Firmware Upgrade Cable

1 Power Cord

1 Rack Mount Kit

1 User Manual

1 Quick Start Guide

Requirements

This section details the required hardware components for successful

installation and use of the KH0116.

Console

• A VGA, SVGA or Multisync monitor capable of the highest resolution that you plan

to use on any computer in

the installation.

• A PS/2 style mouse.

• A PS/2 style keyboard.

Computers

To use and access the KH0116 successfully, your computer requires the following:

• A VGA, SVGA or Multisync card.

• A 6-pin mini-DIN (PS/2 style) mouse port. (KH0116 does not support serial mouse).

• A 6-pin mini-DIN (PS/2 Style) keyboard port

The KH0116 Unit (Front)

16 PORT KVM SWITCH MODEL NO. KH0116

1. Port LEDs

5. Power LED

2. Reset Switch

6. Station ID LED

3. Remote Console Area

4. Firmware Upgrade Section

The KH0116 Unit (Rear)

1. Power Socket

4. Daisy Chain Ports

2. Power Switch

5. CPU Port Section

3. Local Console Port Section

Hardware Installation

To prevent damage to your equipment, please do the following before

you begin installation:

• Make sure that power to all the devices you plan to connect with are turned off.

• Make sure that all devices on the installation are properly grounded. Consult your

dealer for technical details if necessary.

1. Plug your keyboard, mouse, and monitor into the unit's Console Ports.

2. Use the Altusen custom KVM cable sets to connect any available CPU Port to the

Keyboard, Video and Mouse ports of the computer you are installing.

3. Plug the power cable into the KH0116 power socket, and then plug the power

cable into an AC power source.

4. Turn on the power to the computers.

Daisy Chaining

To control even more computers, up to 31 additional KH0116 units can be Daisy

Chained down from the first KVM station (KVM switch). In a complete installation,

you can control up to 512 computers from a single console.To set up a Daisy

Chained installation, do the following:

1. Turn off power to all devices with which you plan to connect.

2. Use a Daisy Chain cable set to connect the Chain Out port of the parent KH0116

unit to the Chain In port of the child KH0116 unit (First Station Out to Second

Station In, Second Station Out to Third Station In, etc.).

Note: Do not use the Chain In port of the First Station. The First Station is the

highest-level parent in the chain.

3.Use custom cable sets to connect any available CPU port on the KH0116 installation to the

Keyboard, Video and Mouse ports of the computers you are installing (refer to page 11).

4. To power up the installation, do the following:

a. Plug in the power cable for the first KVM station (KVM switch), wait for the unit to

ascertainand display its Station ID on the Station ID LED. (The Station ID for the

First Stage unit is 01,the ID for the Second Stage unit is 02, the ID for the Third Stage

unit is 03, and so on.)

b. Plug in the power cables for each KVM station on the installation in order of Second

Station, Third Station and so on. In each case, wait for the Station ID to be ascertained

and displayed on the current KVM station before plugging in the next one.

c. After all the KVM stations are up, power on the computers.

Operation

Port Selection

You can select ports using the following two methods: entering Hot Key combinations from the

keyboard or using the On-Screen Display (OSD).

Hot Key Operation

Activate Hot Key Mode

All Hot Key operations begin by activating Hot Key Mode.

To activate Hot Key mode, follow these steps:

1. Hold down the Num Lock key.

2. At the same time, press and release the Minus key.

3. Release the Num Lock key.

Note: Release the Minus key within 0.5 second or Hot Key activation stops and has no effect.

When Hot Key Mode is active, the following changes occur:

• Caps Lock and Scroll Lock LEDs flash in succession. These stop flashing and revert

to normal status after exiting Hot Key Mode.

• The screen displays a command line prompt with the word "HOTKEY:" in yellow

text on a blue background as well as all subsequent keyed in Hot Key information.

• Ordinary keyboard and mouse function have no effect. You may only input Hot Key

compliant keystrokes and mouse clicks.

• Press [Esc] to exit Hot Key Mode.

Selecting the Active Port

Each CPU port is assigned a Port ID. You can directly access any computer on the

installation with a Hot Key combination that specifies the Port ID of the connected CPU Port.

To select the active port, follow these steps:

1. Activate Hot Key Mode (see page 15).

2. Key in the Port ID.

The Port ID numbers display on the Command Line as you type each number.

For example, enter "0305" to switch to port 5 of the 3rd KVM on the chain. If you make

a mistake, use [Backspace] to erase the wrong number.

3. Press [Enter]. The KVM focus switches to the designated

computer and automatically exits Hot Key Mode.

Please refer the to following table for the rest of the Hot Key operations.

[Port ID] [Enter]

Switches access to the computer corresponding to the Port ID.

[T][n][Enter]

Sets the Auto Scan interval to n seconds, where n is a number from 1 ñ 255.

Activates Auto Scan mode.

[A]

To pause Auto Scan, press [P] or left-click mouse.

To resume Auto Scan, press any key or left-click mouse.

[Num Lock] + [-]

[ ]

Activates Skip mode and skips from the current to the previous accessible port.

[ ]

Activates Skip mode and skips from the current to the next accessible port.

Activates Skip mode and skips from the current port to the last accessible port

[ ]

of the previous KVM switch.

Activates Skip mode and skips from the current port to the first accessible port

[ ]

of the next KVM station.

[B]

Toggles the beeper on or off.

On Screen Display Operation

OSD Overview

To activate the OSD Main Menu follow these steps:

1. Press the pre-assigned Hot Key [Scroll Lock] two times. The login window appears.

Note: Optionally, you can assign the Control key as the Main Menu Hot Key.

For additional information, see manual for details.

2. Do either of the following:

Enter a valid password in the password field and then press [Enter].

For a first time OSD activation or if the password has not been set, leave the

password field blank and then press [Enter].

The OSD Main Menu appears in Administrator mode. Administrator mode provides

access to both Administrator and User functions. You can also set-up operations

(including future password authorization) as desired.

OSD Navigation

You can use any of the following methods to navigate the OSD Main Menu screen:

• To dismiss the main menu and deactivate the OSD, press [Esc] or click the X at the

upper right corner.

• To logout of the OSD, press [F8] or click F8 LOUT at the top of the screen.

• To move up or down through the list one line at a time, press the up/down arrows

keys or click the up/down triangle symbols (

) located on the OSD's right scroll bar.

• To move up or down through the list one screen at a time, press the [PgUp] or

[PgDn] key or click the up/down arrow symbols (

) located on the OSD's

right scroll bar.

• To activate a port, double-click its name in the list or highlight the name and then

press [Enter].

• Each action returns you to the menu one level above.

Specifications

Function

KH0116

Direct

Computer

Connections

Max.

512 (via Daisy Chain)

Port Selection

Hotkey; OSD

Keyboard

1 x 6-pin Min Din Female (Purple)

Console Ports

Video

1 x HDB-15 Female (Blue)

Mouse

1 x 6-pin Min Din Female (Green)

KVM Ports

16 x SPHD-15 Female (Yellow)

Connectors

1 x DB-25 Female (Black)

Daisy Chain Port

Out

1 x DB-25 Male (Black)

Firmware Upgrade

1 x RJ-11 Female (Black)

Remote Console

1 x RJ-45 Female (Black)

Power

1 x 3 -Prong AC Socket

Reset

1 x Semi-Recessed Pushbutton

Power

1 x Rocker

Switches

F/W Upgrade Recovery

1 x Slide

Remote Console

1 x Locking Pushbutton

On Line

16 (Green)

Selected

16 (Orange)

LEDs

Power

1 (Blue)

Station ID

2 x 7 Segment (Orange)

Emulation

Keyboard / Mouse

PS/2

Video

2048 x 1536; DDC2B

Scan Interval

1~255 Seconds

I/P Rating

100-240 V AC; 50/60Hz; 1A

Power Consumption

120V/8W ; 230V/8W (Max.)

Operating Temp.

0 -50˚C

Environment

Storage Temp.

-20 - 60˚C

Humidity

0-80% RH, Non-Condensing

Housing

Metal

Physical

Weight

3.56 kg

Properties

Dimensions ( L x W x H )

43.70 x 21 .00 x 4.40cm (19" / 1U)

* All specifications are subject to change without notice.