Altusen Altusen KH-0116 빠른 시작 Quide
{카테고리_이름} Altusen Altusen KH-0116에 대한 빠른 시작 Quide을 온라인으로 검색하거나 PDF를 다운로드하세요. Altusen Altusen KH-0116 1 페이지.
페이지 인쇄Online Registration
International:
• http://support.aten.com
North America:
• http://www.aten-usa.com/product_registration
Technical Phone Support
International:
• 886-2-8692-6959
China:
KH0116 High Density KVM Switch Quick Start Guide
• 86-10-5255-0110
Japan:
• 81-3-5323-7178
© Copyright 2010 ATEN
®
International Co., Ltd. www.aten.com
Korea:
• 82-2-467-6789
Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd.
North America:
All rights reserved. All other trademarks are the property of their respective owners.
• 1-888-999-ATEN Ext: 4988
PAPE-1214-400G Printing Date: 07/2010
United Kingdom:
This product is RoHS compliant
• 44-8-4481-58923
1
Package Contents
The complete KH0116 package consists of:
1 KH0116 KVM Switch
2 Custom KVM Cable Set
1 Firmware Upgrade Cable
1 Power Cord
1 Rack Mount Kit
1 User Manual
1 Quick Start Guide
2
Requirements
This section details the required hardware components for successful
installation and use of the KH0116.
Console
• A VGA, SVGA or Multisync monitor capable of the highest resolution that you plan
to use on any computer in
the installation.
• A PS/2 style mouse.
• A PS/2 style keyboard.
Computers
To use and access the KH0116 successfully, your computer requires the following:
• A VGA, SVGA or Multisync card.
• A 6-pin mini-DIN (PS/2 style) mouse port. (KH0116 does not support serial mouse).
• A 6-pin mini-DIN (PS/2 Style) keyboard port
3
The KH0116 Unit (Front)
1
16 PORT KVM SWITCH MODEL NO. KH0116
16 PORT KVM SWITCH MODEL NO. KH0116
07
2
3
4
5
6
1. Port LEDs
5. Power LED
2. Reset Switch
6. Station ID LED
3. Remote Console Area
4. Firmware Upgrade Section
4
The KH0116 Unit (Rear)
1
2
3
4
5
1. Power Socket
4. Daisy Chain Ports
2. Power Switch
5. CPU Port Section
3. Local Console Port Section
5
Hardware Installation
To prevent damage to your equipment, please do the following before
you begin installation:
!
• Make sure that power to all the devices you plan to connect with are turned off.
• Make sure that all devices on the installation are properly grounded. Consult your
dealer for technical details if necessary.
1. Plug your keyboard, mouse, and monitor into the unit's Console Ports.
2. Use the Altusen custom KVM cable sets to connect any available CPU Port to the
Keyboard, Video and Mouse ports of the computer you are installing.
3. Plug the power cable into the KH0116 power socket, and then plug the power
cable into an AC power source.
4. Turn on the power to the computers.
Daisy Chaining
To control even more computers, up to 31 additional KH0116 units can be Daisy
Chained down from the first KVM station (KVM switch). In a complete installation,
you can control up to 512 computers from a single console.To set up a Daisy
Chained installation, do the following:
1. Turn off power to all devices with which you plan to connect.
2. Use a Daisy Chain cable set to connect the Chain Out port of the parent KH0116
unit to the Chain In port of the child KH0116 unit (First Station Out to Second
Station In, Second Station Out to Third Station In, etc.).
Note: Do not use the Chain In port of the First Station. The First Station is the
highest-level parent in the chain.
3.Use custom cable sets to connect any available CPU port on the KH0116 installation to the
Keyboard, Video and Mouse ports of the computers you are installing (refer to page 11).
4. To power up the installation, do the following:
a. Plug in the power cable for the first KVM station (KVM switch), wait for the unit to
ascertainand display its Station ID on the Station ID LED. (The Station ID for the
First Stage unit is 01,the ID for the Second Stage unit is 02, the ID for the Third Stage
unit is 03, and so on.)
b. Plug in the power cables for each KVM station on the installation in order of Second
Station, Third Station and so on. In each case, wait for the Station ID to be ascertained
and displayed on the current KVM station before plugging in the next one.
c. After all the KVM stations are up, power on the computers.
6
Operation
Port Selection
You can select ports using the following two methods: entering Hot Key combinations from the
keyboard or using the On-Screen Display (OSD).
Hot Key Operation
Activate Hot Key Mode
All Hot Key operations begin by activating Hot Key Mode.
To activate Hot Key mode, follow these steps:
1. Hold down the Num Lock key.
2. At the same time, press and release the Minus key.
3. Release the Num Lock key.
Note: Release the Minus key within 0.5 second or Hot Key activation stops and has no effect.
When Hot Key Mode is active, the following changes occur:
• Caps Lock and Scroll Lock LEDs flash in succession. These stop flashing and revert
to normal status after exiting Hot Key Mode.
• The screen displays a command line prompt with the word "HOTKEY:" in yellow
text on a blue background as well as all subsequent keyed in Hot Key information.
• Ordinary keyboard and mouse function have no effect. You may only input Hot Key
compliant keystrokes and mouse clicks.
• Press [Esc] to exit Hot Key Mode.
Selecting the Active Port
Each CPU port is assigned a Port ID. You can directly access any computer on the
installation with a Hot Key combination that specifies the Port ID of the connected CPU Port.
To select the active port, follow these steps:
1. Activate Hot Key Mode (see page 15).
2. Key in the Port ID.
The Port ID numbers display on the Command Line as you type each number.
For example, enter "0305" to switch to port 5 of the 3rd KVM on the chain. If you make
a mistake, use [Backspace] to erase the wrong number.
3. Press [Enter]. The KVM focus switches to the designated
computer and automatically exits Hot Key Mode.
Please refer the to following table for the rest of the Hot Key operations.
[Port ID] [Enter]
Switches access to the computer corresponding to the Port ID.
[T][n][Enter]
Sets the Auto Scan interval to n seconds, where n is a number from 1 ñ 255.
Activates Auto Scan mode.
[A]
To pause Auto Scan, press [P] or left-click mouse.
To resume Auto Scan, press any key or left-click mouse.
[Num Lock] + [-]
[ ]
Activates Skip mode and skips from the current to the previous accessible port.
[ ]
Activates Skip mode and skips from the current to the next accessible port.
Activates Skip mode and skips from the current port to the last accessible port
[ ]
of the previous KVM switch.
Activates Skip mode and skips from the current port to the first accessible port
[ ]
of the next KVM station.
[B]
Toggles the beeper on or off.
On Screen Display Operation
OSD Overview
To activate the OSD Main Menu follow these steps:
1. Press the pre-assigned Hot Key [Scroll Lock] two times. The login window appears.
Note: Optionally, you can assign the Control key as the Main Menu Hot Key.
For additional information, see manual for details.
2. Do either of the following:
Enter a valid password in the password field and then press [Enter].
For a first time OSD activation or if the password has not been set, leave the
password field blank and then press [Enter].
The OSD Main Menu appears in Administrator mode. Administrator mode provides
access to both Administrator and User functions. You can also set-up operations
(including future password authorization) as desired.
OSD Navigation
You can use any of the following methods to navigate the OSD Main Menu screen:
• To dismiss the main menu and deactivate the OSD, press [Esc] or click the X at the
upper right corner.
• To logout of the OSD, press [F8] or click F8 LOUT at the top of the screen.
• To move up or down through the list one line at a time, press the up/down arrows
keys or click the up/down triangle symbols (
) located on the OSD's right scroll bar.
• To move up or down through the list one screen at a time, press the [PgUp] or
[PgDn] key or click the up/down arrow symbols (
) located on the OSD's
right scroll bar.
• To activate a port, double-click its name in the list or highlight the name and then
press [Enter].
• Each action returns you to the menu one level above.
7
Specifications
Function
KH0116
Direct
16
Computer
Connections
Max.
512 (via Daisy Chain)
Port Selection
Hotkey; OSD
Keyboard
1 x 6-pin Min Din Female (Purple)
Console Ports
Video
1 x HDB-15 Female (Blue)
Mouse
1 x 6-pin Min Din Female (Green)
KVM Ports
16 x SPHD-15 Female (Yellow)
Connectors
In
1 x DB-25 Female (Black)
Daisy Chain Port
Out
1 x DB-25 Male (Black)
Firmware Upgrade
1 x RJ-11 Female (Black)
Remote Console
1 x RJ-45 Female (Black)
Power
1 x 3 -Prong AC Socket
Reset
1 x Semi-Recessed Pushbutton
Power
1 x Rocker
Switches
F/W Upgrade Recovery
1 x Slide
Remote Console
1 x Locking Pushbutton
On Line
16 (Green)
Selected
16 (Orange)
LEDs
Power
1 (Blue)
Station ID
2 x 7 Segment (Orange)
Emulation
Keyboard / Mouse
PS/2
Video
2048 x 1536; DDC2B
Scan Interval
1~255 Seconds
I/P Rating
100-240 V AC; 50/60Hz; 1A
Power Consumption
120V/8W ; 230V/8W (Max.)
Operating Temp.
0 -50˚C
Environment
Storage Temp.
-20 - 60˚C
Humidity
0-80% RH, Non-Condensing
Housing
Metal
Physical
Weight
3.56 kg
Properties
Dimensions ( L x W x H )
43.70 x 21 .00 x 4.40cm (19" / 1U)
* All specifications are subject to change without notice.