Alula Z-Wave RE934Z Manuel d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Alula Z-Wave RE934Z. Alula Z-Wave RE934Z 2 pages. Expansion card, connect+ encrypted

Imprimer la page

Connect Family

RE934Z Z-Wave Expansion Card

system. The system will be able to start or join an existing Z-Wave network,

and control Z-Wave capable 3rd party devices.

Features

• Expansion Card that plugs into the Connect+ / BAT-Connect

• Provides communications with Z-Wave devices enabling a broad

range of home automation features

Installation

1. Power down the system.

2. Insert the Z-Wave Expansion Card.

Connect+: Insert the RE934Z into expansion slot 3 of the Connect+, gently inserting the

connector and snapping the stand-offs into place.

BAT-Connect: Insert the RE934Z into expansion Module Slot of the BAT-Connect, gently

inserting the connector and snapping the stand-offs into place.

3. Power up the system.

Connect+

SLOT 1

SLOT 2

BACKUP

BATTERY

LED

Indication

Power

ON - When system is AC powered

(Green)

OFF - When system does not have AC power

Z-Wave

(Normally) OFF - flashes with each Z-Wave message received from system

(Red)

Verify proper installation and operation using the panel's installation manual.

RE934Z Z-Wave

Connect+

adds home automation capability to the

SLOT 3

Expansion Card

™

Encrypted

™

BAT-Connect