Alula Z-Wave RE934Z Instrukcja instalacji
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt komputerowy Alula Z-Wave RE934Z. Alula Z-Wave RE934Z 2 stron. Expansion card, connect+ encrypted
Drukuj stronęConnect Family
RE934Z Z-Wave Expansion Card
system. The system will be able to start or join an existing Z-Wave network,
and control Z-Wave capable 3rd party devices.
Features
• Expansion Card that plugs into the Connect+ / BAT-Connect
• Provides communications with Z-Wave devices enabling a broad
range of home automation features
Installation
1. Power down the system.
2. Insert the Z-Wave Expansion Card.
Connect+: Insert the RE934Z into expansion slot 3 of the Connect+, gently inserting the
connector and snapping the stand-offs into place.
BAT-Connect: Insert the RE934Z into expansion Module Slot of the BAT-Connect, gently
inserting the connector and snapping the stand-offs into place.
3. Power up the system.
Connect+
SLOT 1
SLOT 2
BACKUP
BATTERY
LED
Indication
Power
ON - When system is AC powered
(Green)
OFF - When system does not have AC power
Z-Wave
(Normally) OFF - flashes with each Z-Wave message received from system
(Red)
Verify proper installation and operation using the panel's installation manual.
RE934Z Z-Wave
Connect+
adds home automation capability to the
SLOT 3
Expansion Card
™
Encrypted
™
BAT-Connect
I