Artopex NANO Manuel d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Artopex NANO. Artopex NANO 6 pages.

Nano Installation Guide

Wall Connector

Déc. 2007

b) Top Cap

a) Screw the connectors to the wall. Install the first

connector to the "base" section of the Nano screen

(underneath the work surface area), and the second

connector attaches in line with the top of the screen.

b) Take off the top cap of the Nano screen.

c) Carefully lower the flat plates into the vertical profile

of the Nano screen, screw them in enough just to hold

them in place, do not tighten them completely.

d) Bring the Nano screen forward and insert it into the

wall connectors. Loosen the flat plates one at a time,

and then position them into the inside of the indents

of the wall connectors. Tighten the screws while

leveling the panel.

e) Use the central hole only when the wall is not level

or straight.

Position of the

flat plates

pg.3