Artopex NANO Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Artopex NANO. Artopex NANO 6 pages.

Nano Installation Guide

Privacy Screens

Connecting

strip

Déc. 2007

Bottom cap cover

a) Screw the L bracket onto the privacy screen. Positioning it

over the pre-drilled holes. Be sure to place the L bracket by

the bottom cap cover. (cover C1356).

b) On a mobile table, bring the screen toward the table, be sure

that the screen is centered and screw the L bracket into the

underside of the surface.

c) On a freestanding table, create a space between the surface

and the legs (and or the modesties) and slightly loosen the

screws holding the table together, now insert and tighten the

L bracket under the surface. Now re-tighten the screws on

the modesties and legs.

d) Before installing the 2nd privacy screen, take off the top cap

of the Nano screen, install the post and the connecting strip.

e) Loosen the screw that you will find under the vertical profile

of the screen and insert the small support plate. Install it in

such a way that it will hold up the post, now tighten the screw.

f) Now install the 2nd privacy screen, connect it to the post with

a connecting strip, tighten the screws under the surface.

Note: Always install 2 privacy screens at

90 degrees to assure stability

pg.4