3M 710 Manuel d'instructions - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} 3M 710. 3M 710 20 pages. Splicing rig
Également pour 3M 710 : Brochure & Specs (4 pages), Spécifications (4 pages)
Imprimer la page
8.5 Hold back the blade guard and use finger pressure
on the metal ends of the new blade assembly to
insert it behind the stuffer teeth into the blade slot of
the "T" bar.*
*Note: For proper operation you must ensure the blade
guard moves freely on both sides of the blade
assembly.
8.6 Looking at the center of the "T" bar faceplate, align
the tips of the red stuffer with the mid-point of the
individual blade tips of the cutter blade. Use the
3mm hex wrench to lightly-tighten the two (2)
screws on the faceplate.
1
3M Logo
& flat side
of blade
facing up
78-815-304--E