Alva GCS05 Manuel de démarrage rapide - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Alva GCS05. Alva GCS05 12 pages. High pressure gas cooker two burner automatic stove
Imprimer la page
The leak test must be carried out in a well-ventilated area, free
from any flames or other sources of ignition.
Connection
in assembly
Foamy
bubbles
indicate a
leak
Connections to be leak tested
Hose to High pressure cylinder connection
Hose to appliance
Hose to Cylinder Valve
Fig.11
Turn to ON for Ignition
Fig.12
LEAK TEST
•
With the cylinder connected to
the stove. Open the cylinder
valve.
•
Brush the connections (stove
to cylinder) with a solution of
equal parts soap and water
(make sure it's foamy).
•
A stream of bubbles forming
indicates a gas leak. (See
Fig.11)
•
If bubbles appear, turn the
cylinder valve OFF (clockwise)
and disconnect the stove from
the gas cylinder.
•
Tighten the connection and
retry the leak test.
•
If you are unsure or if you
cannot tighten the connection,
place the cylinder outside in a
cool, well-ventilated area and
contact Alva on 086 100 ALVA
(2582).
•
A leak between the stove and
cylinder can lead to a high
pressure fire, which is very
dangerous and can result in
extensive injury or even death.
USING THE COOKER
1. To light the burners:
•
Open the cylinder valve
1½ turns. (See Fig.12)
•
Ignite your flame source
and hold it above the
burners.
•
Open the main gas valve.
(Fig. 12)
•
To ignite the second
burner repeat the same
process.
6
PRECAUTIONS
Leak test all
connections after each
tank refill
NEVER check for
leaks with a match or
open flame
DO NOT store or use
gasoline or other
flammable vapours
and liquids in the
vicinity of this or any
other appliance.