Alva GCS05 Skrócona instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kuchenki Alva GCS05. Alva GCS05 12 stron. High pressure gas cooker two burner automatic stove
Drukuj stronę
The leak test must be carried out in a well-ventilated area, free
from any flames or other sources of ignition.
Connection
in assembly
Foamy
bubbles
indicate a
leak
Connections to be leak tested
Hose to High pressure cylinder connection
Hose to appliance
Hose to Cylinder Valve
Fig.11
Turn to ON for Ignition
Fig.12
LEAK TEST
•
With the cylinder connected to
the stove. Open the cylinder
valve.
•
Brush the connections (stove
to cylinder) with a solution of
equal parts soap and water
(make sure it's foamy).
•
A stream of bubbles forming
indicates a gas leak. (See
Fig.11)
•
If bubbles appear, turn the
cylinder valve OFF (clockwise)
and disconnect the stove from
the gas cylinder.
•
Tighten the connection and
retry the leak test.
•
If you are unsure or if you
cannot tighten the connection,
place the cylinder outside in a
cool, well-ventilated area and
contact Alva on 086 100 ALVA
(2582).
•
A leak between the stove and
cylinder can lead to a high
pressure fire, which is very
dangerous and can result in
extensive injury or even death.
USING THE COOKER
1. To light the burners:
•
Open the cylinder valve
1½ turns. (See Fig.12)
•
Ignite your flame source
and hold it above the
burners.
•
Open the main gas valve.
(Fig. 12)
•
To ignite the second
burner repeat the same
process.
6
PRECAUTIONS
Leak test all
connections after each
tank refill
NEVER check for
leaks with a match or
open flame
DO NOT store or use
gasoline or other
flammable vapours
and liquids in the
vicinity of this or any
other appliance.