DNP CX-120 Manuel d'instruction - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DNP CX-120. DNP CX-120 16 pages. Direct dye sublimation printer
Imprimer la page
How to Use the Status Monitor
Upgrade of the printer's firmware is carried out on the Others screen.
Specify a file and upgrade the printer's firmware.
1
A
Select drive where the file is stored using A.
2
B
Specify folder where the file is stored using B.
3
C
Select file to download using C. Only the target file to be downloaded will be displayed at C. Files are categorized
based on extensions as follows.
● *.PRF : Printer firmware
● *.HDF : Thermal head settings
● *.CFG : Configuration data
● *.TBL : Table data
● *.ICF
: Laminator firmware
4
D
Click on D to upgrade firmware.
Caution
(1) When downloading printer firmware, do not switch off the power untildownload is complete. Printer may
fail to reboot if the power is switched off during download. Refer to Troublshooting (page 29) of this manual
when startup fails.
(2) laminator firmware and configuration data cannot be run when printer is in the Download mode. Do so
when in the Standard Mode.
Upgrading Firmware
A
B
C
D
12