DNP CX-120 Kullanım Kılavuzu - Sayfa 12

Yazıcı DNP CX-120 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DNP CX-120 16 sayfaları. Direct dye sublimation printer

How to Use the Status Monitor

Upgrade of the printer's firmware is carried out on the Others screen.

Specify a file and upgrade the printer's firmware.

Select drive where the file is stored using A.

Specify folder where the file is stored using B.

Select file to download using C. Only the target file to be downloaded will be displayed at C. Files are categorized

based on extensions as follows.

● *.PRF : Printer firmware

● *.HDF : Thermal head settings

● *.CFG : Configuration data

● *.TBL : Table data

● *.ICF

: Laminator firmware

Click on D to upgrade firmware.

Caution

(1) When downloading printer firmware, do not switch off the power untildownload is complete. Printer may

fail to reboot if the power is switched off during download. Refer to Troublshooting (page 29) of this manual

when startup fails.

(2) laminator firmware and configuration data cannot be run when printer is in the Download mode. Do so

when in the Standard Mode.

Upgrading Firmware