Aion Electronics PENUMBRA BASS FUZZ Manuel - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aion Electronics PENUMBRA BASS FUZZ. Aion Electronics PENUMBRA BASS FUZZ 10 pages.
Imprimer la page
BUILD NOTES
Transformer orientation
The 42TM019 transformer is symmetrical, so it can be inadvertently installed backwards, which would
give it the wrong coil resistance for the pickup simulation.
Pin 1 and 6 are marked on the PCB. The side with pin 1 corresponds to the primary coil, which is marked
"P" on the transformer. So in other words, the side marked "P" should be facing toward the SW2 pads.
Bypassing the transformer
With the toggle switch in the "off" position, the transformer is fully out of the circuit. But, if you're not
able to source the transformer or just don't want to use it, you can leave it off entirely.
Jumper the two center pads of the toggle switch together (pads 2 and 6) and omit the following parts:
• C1-2
• R1-4
• Q1
• XFM1
PENUMBRA BASS FUZZ
5