Aion Electronics PENUMBRA BASS FUZZ Manuel - Sayfa 5

Müzik Pedalı Aion Electronics PENUMBRA BASS FUZZ için çevrimiçi göz atın veya pdf Manuel indirin. Aion Electronics PENUMBRA BASS FUZZ 10 sayfaları.

BUILD NOTES

Transformer orientation

The 42TM019 transformer is symmetrical, so it can be inadvertently installed backwards, which would

give it the wrong coil resistance for the pickup simulation.

Pin 1 and 6 are marked on the PCB. The side with pin 1 corresponds to the primary coil, which is marked

"P" on the transformer. So in other words, the side marked "P" should be facing toward the SW2 pads.

Bypassing the transformer

With the toggle switch in the "off" position, the transformer is fully out of the circuit. But, if you're not

able to source the transformer or just don't want to use it, you can leave it off entirely.

Jumper the two center pads of the toggle switch together (pads 2 and 6) and omit the following parts:

• C1-2

• R1-4

• Q1

• XFM1

PENUMBRA BASS FUZZ