DNP IDW520 Manuel de démarrage rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} DNP IDW520. DNP IDW520 17 pages. Id photo system
Également pour DNP IDW520 : Manuel de démarrage (17 pages)

Imprimer la page

IDW520 Photo ID System

Install the Ink Ribbon

• Orient the Ribbon. Orient the new ink ribbon so that

the supply side (larger side with yellow spool end) is

towards you, and the take-up spool (smaller side with

white spool ends) is towards the back of the printer.

• Place the ribbon in the printer. Place the left sides

of the ribbons onto the printer flanges one at a time.

Press the right sides of the ribbons into their holders until they click into

place. Remove any slack from the ribbon by rotating the ribbon towards

the supply side. Close the ribbon compartment.

PLACE THIS SIDE

FIRST

NOTE: The yellow ribbon flange is inserted into the yellow holder.

• Wait for the blank prints. With the printer turned ON, the printer will

initialize and eject 3 blanks sheets of paper. The Power / Ready light

will remain lit. The printer is ready to print. If the error light remains lit,

recheck that the paper and ribbon are loaded correctly.

• Install the paper tray. The paper tray can hold up to 20 prints. However,

it is recommended that prints are removed from the tray at regular

intervals to prevent paper jams.

SUPPLY

TAKE-UP

PLACE THIS SIDE

SECOND