ACPro 2PAMSH09A-17 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ACPro 2PAMSH09A-17. ACPro 2PAMSH09A-17 16 pages. Single-zone ductless mini-split system

Imprimer la page

Airflow Direction Control

• Adjust the air flow direction properly. Failure to do so

may cause discomfort or uneven room temperatures.

• Adjust the horizontal louver using the remote control.

• Adjust the vertical louver manually.

Adjusting vertical air flow (Up/Down)

Perform this function while the unit is in operation. Use

the remote control to adjust the vertical air flow

direction. The horizontal louver can move slightly for

each press or continuously swing up and down

automatically. Please refer to the Remote Control

Operation Manual for details.

Adjusting vertical air flow (Left/Right)

• Move the deflector rod manually to adjust the air flow

in the direction you prefer.

IMPORTANT: Do not put your fingers into the panel

of the blower and suction side. The high-speed fan

inside may cause injury.

CAUTION

• Do not operate the air conditioner for long periods

with the air flow direction set downward in cooling or

dehumidifying mode. Doing so may cause

condensation to occur on the surface of the horizontal

louver, resulting in moisture dropping onto the floor

and/or furnishings.

• After a quick restart, the horizontal louver may remain

static for approximately 10 seconds.

• Open angle of the horizontal louver should not be set

too small as Cooling or Heating performance may be

reduced due to an air flow area that is too restricted.

• Do not move the horizontal louver manually. Doing so

will result in the horizontal louver being out of sync.

Should this happen, please cease operating the unit,

power down the unit for a few seconds, then power

the unit back up to restart the air conditioner.

Page 5