FleetCarma C2 Device Instructions d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} FleetCarma C2 Device. FleetCarma C2 Device 3 pages. For nissan leaf
Imprimer la page
Step 3: Confirm Operation
Ensure that the LED lights are indicating the C2 device is working:
•
A solid Orange LED indicates the device is receiving power.
•
A solid Blue LED indicates the device is successfully communicating data. It may take
some time (up to 5 mins or longer) for the solid blue light to appear if the cell signal is weak.
If one or both LEDs do not light up after installation, follow these steps:
1. Ensure vehicle is started (vehicle ready to drive).
2. Remove the C2 device, wait for 10 seconds, and clip it back in.
3. LEDs still not lit correctly? Contact Ergon Network/Energex at:
If the orange LED is solid, and the blue LED is either solid or flashing, you have successfully
completed the installation.
You are all set to go. If you service your vehicle and the C2 device is removed by the service agent
just ensure it is re-installed.
SmartCharge Queensland
Email: [email protected]