ETA Systems ETA-PD8 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ETA Systems ETA-PD8. ETA Systems ETA-PD8 12 pages. Power conditioner & distribution unit

Imprimer la page

INTRODUCTION

Thank you for purchasing the ETA Systems ETA-PD8 AC Power Conditioner & Distribution Unit. The ETA-PD8 has been designed to

meet most installation requirements for AC power distribution and equipment power protection.

The ETA-PD8 features noise filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by

nearby radio transmitters or wireless products. EMI filters are incorporated to reduce noise from Electromagnetic Interference (EMI)

from such items as electric motors and switching power supplies. The benefit of these filters can be seen on video products or audibly

by reducing static pops and external signal interference.

Unstable AC Mains voltage is one of the main reasons for equipment failure. The amount of energy that can be injected into the power

system can be immense with voltages reaching 6kV or amperage peaks of 3000A. These spikes are very fast and usually only last for

a very short period of time. The ETA-PD8's circuitry is very fast and can suppress unwanted energy within a nanosecond response and

sustain the suppression up to 2 milliseconds, thus ensuring virtually trouble free protection.

The ETA-PD8 offers power management control, noise filtering, and spike/surge protection, making it the most compact, effective

power management protection system on the market today.

KEY FEATURES

• 9 Total Outlets

• 6 Rear Panel Switched Outlets and 2 Rear Panel Unswitched Outlets

• 1 Front Panel Unswitched Convenience Outlet

• RFI Noise Filtering to Reduce Radio Frequency Interference

• EMI to Reduce Electromagnetic Interference

• Circuit Breaker Protection @ 15A

• Spike Suppression up to 6000V

APPLICATIONS

The ETA-PD8 was designed to be flexible with features that allow it to be used in a variety of applications. The ETA-PD8 can be

used solely for protection against voltage surges or for AC distribution. If fuzzy video or frequent static pops occur, the AC power

conditioning may eliminate or reduce those inconveniences. The following are just a few examples of applications where the ETA-PD8

can be used:

• Restaurants

• Houses of Worship

• Schools

• Home Theaters

• Office Buildings

• Sports Bars

ETA-PD8

Power Conditioner & Distribution Unit

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 5 –

Specifications are subject to change without notice.

ETAsys.com