ETA Systems ETA-PD8 Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ETA Systems ETA-PD8. ETA Systems ETA-PD8 12 pages. Power conditioner & distribution unit

Imprimer la page

FRONT PANEL FEATURES

1. Unswitched AC Outlet – The 120VAC outlet is always live when the ETA-PD8 power cord is plugged into an AC mains power

source and voltage is present. Note: The AC mains power switch does not affect the Unswitched AC Outlet. The Unswitched

Outlet is protected by the surge protection circuitry.

2. AC Mains Breaker – The 15A rated breaker will open if the combined draw of all AC outlets exceeds 15A. Note: The breaker is

designed to exceed its rating for a short period of time. If the breaker is tripped, you must first remove the load from the ETA-PD8

and then push to reset.

3. Power Switch – To turn the ETA-PD8 on or off, press the switch to the ON or OFF position. The power switch will illuminate

when in the "On" position.

REAR PANEL FEATURES

1. AC Mains Input – Connect the 9' (3m) power cord to a 15A 120VAC outlet to provide power to the ETA-PD8.

2. AC Switched Power Outlets – These six outlets are "Live" when the front panel power switch is activated.

3. AC Unswitched Power Outlets – These two outlets are always "Live" when the ETA-PD8 is plugged into a 120VAC source.

Installation

Before installing, we strongly suggest you read the entire manual to ensure you benefit from all the features of the ETA-PD8. The

ETA-PD8 can be placed on a shelf or rack mounted in a standard 19" width rack. When rack mounting, use Rack Rail type screws which

are

⁄

" x 1" When rack mounted, placement within the rack is flexible however the ETA-PD8 should be within 6' of a dedicated 15A

AC outlet. Always make sure the 15A outlet is properly inspected by a certified electrician prior to connecting the ETA-PD8. Make sure

to inspect the equipment that is to be plugged into the ETA-PD8 to ensure it does not exceed 15A total amperage draw.

ETA-PD8

Power Conditioner & Distribution Unit

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 6 –

Specifications are subject to change without notice.

ETAsys.com