DOD carcosa fuzz Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DOD carcosa fuzz. DOD carcosa fuzz 4 pages.

gain and attack characteristics become less-responsive to volume changes and more

aggressive fuzz tones are available - All the way up to strange sputtering synthy horn-

like tones.

In most uses the Carcosa's HI-CUT control will rarely go above noon, the rest of the HI-

CUT travel is meant to make up for loss of attack and the extreme sag caused by higher

bias (AFTER) settings.

A final general rule is that we have found that adjusting the BEFORE and AFTER controls

in opposite directions can yield a wide array of immediately controllable tones. For

example if you set the BEFORE control @ 3:00, set the AFTER control @ 9:00, or vice

versa. But don't be afraid to experiment, some fantastically horrific sounds can be

found in the extremes

Most guitarists/bassists will favor placing the Carcosa at the beginning of their chain of

effects, so start with that placement.

A typical effects signal chain will consist of Distortion and Fuzz effects first then

Modulation effects (Chorus, Flanger, Phaser, Tremolo, etc...) next and then finally Time

based effects (Delay and Reverb).

Placing the Carcosa toward the front of your chain or effects will preserve the vibe no

matter the pedal combination that follows. That being said you may wish to experiment

with different effect placements.

SPECIFICATIONS:

Input

Output

Current Draw

Bypass

Power

Warranty

1/4" TS Unbalanced - 500 kΩ

1/4" TS Unbalanced - 1 kΩ

4 mA

True Bypass

9VDC alkaline battery (not included)

HARMAN PS0913DC power adapter (optional)

1 Year

10653 River Front Parkway

South Jordan, UT 84095

801-566-8800

DOD

USA

Rev A - 2/16