DOD carcosa fuzz 사용자 설명서 - 페이지 4

{카테고리_이름} DOD carcosa fuzz에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOD carcosa fuzz 4 페이지.

DOD carcosa fuzz 사용자 설명서
gain and attack characteristics become less-responsive to volume changes and more
aggressive fuzz tones are available - All the way up to strange sputtering synthy horn-
like tones.
In most uses the Carcosa's HI-CUT control will rarely go above noon, the rest of the HI-
CUT travel is meant to make up for loss of attack and the extreme sag caused by higher
bias (AFTER) settings.
A final general rule is that we have found that adjusting the BEFORE and AFTER controls
in opposite directions can yield a wide array of immediately controllable tones. For
example if you set the BEFORE control @ 3:00, set the AFTER control @ 9:00, or vice
versa. But don't be afraid to experiment, some fantastically horrific sounds can be
found in the extremes
Most guitarists/bassists will favor placing the Carcosa at the beginning of their chain of
effects, so start with that placement.
A typical effects signal chain will consist of Distortion and Fuzz effects first then
Modulation effects (Chorus, Flanger, Phaser, Tremolo, etc...) next and then finally Time
based effects (Delay and Reverb).
Placing the Carcosa toward the front of your chain or effects will preserve the vibe no
matter the pedal combination that follows. That being said you may wish to experiment
with different effect placements.
SPECIFICATIONS:
Input
Output
Current Draw
Bypass
Power
Warranty
1/4" TS Unbalanced - 500 kΩ
1/4" TS Unbalanced - 1 kΩ
4 mA
True Bypass
9VDC alkaline battery (not included)
HARMAN PS0913DC power adapter (optional)
1 Year
10653 River Front Parkway
South Jordan, UT 84095
801-566-8800
DOD
USA
Rev A - 2/16