Cyfral Cosmo Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cyfral Cosmo. Cyfral Cosmo 10 pages.

with the RFID grapple, the unit gives four short sound signals. In the event of

unregistered key, the unit generates steady tone of access denial.

6. Procedure of RFID pendants programming

The COSMO intercom unit is equipped with the reader of RFID proximity pendants.

The reader is located directly under the backlit window of a business card. In order to

activate the grabble or program RFID pendant it is necessary to close it the window

of a business card to the distance of approx. 10 mm.

Two MASTER pendants can be programmed to the unit and allow to program and

remove additional pendants up to 98 pcs. The total capacity of the memory is 100

pendants.

• Assembly SW3 jumper marked on the unit plate as "MASTER PROG." The

unit shall confirm programming mode with sound signals,

• Place, to the antennae located between backlight diodes, two RFID pendants

that are supposed to be programmed as MASTER,

• Registering the pendant is confirmed with sound signals,

• To quit the programming mode, it is necessary to remove SW3 jumper, the

unit is operational.

REMARKS:

SW3 jumpers are used for programming MASTER pendants,

Activation of MASTER programming mode deletes both previously recorded

MASTER pendants,

Pressing bottom button deletes all programmed pendants (not MASTER),

MASTER keys open electromagnetic grapple as usual.

In order to program remaining keys, it is necessary to press UN1 call button

and keep it pressed minimum five sec. (during the time the unit shall make full

ringing).

Keeping the UN1 button pressed, close MASTER pendant to the reader

(confirmation of the entry in the programming is signaled with three sound

signal).

Move MASTER pendant away from the reader and release UN1 button, the

unit is in the programming mode, we are allowed to add next pendants.

To remove the pendant from the unit it is necessary to press and keep UN1

buttons pressed and close a pendant which is supposed to be removed

(confirmation of removal is done with double sound signal).

REMARKS: