Cyfral Cosmo Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cyfral Cosmo. Cyfral Cosmo 10 pages.

The unit remains in the programming mode by 10 sec. every closing of a key

prolongs the time by next 10 sec.

The default setting is 4 sec. It can be adjusted within 1-15 sec. To set new time, the

following steps shall be done:

Start "programming remaining pendants" – point 6.2

Press at the same time: Button "UN1" in the unit and electric doorstrike

opening button in any Uniphone (or button "UN1" and short circuit the clamp of

UN1 uniphone to the clamp MASA)

The unit shall confirm with five short sound signals the transition into opening

time programming.

Since this moment the opening time is set for "1 sec" and every pressing of

"UN1" button increases this time for next sec.

Upon 10 sec. since pressing "UN1" button the unit goes into the mode of

normal operation, but the amount of sound signals shall provide programmed

new opening time.

REMARKS:

Activation of programming the opening time always resets the time to "1 sec"

For example, to set the time "7 sec." the button "UN1" shall be pressed six

times and wait 10 sec. for automatic quick from programming mode.

TECHNICAL DATA OF THE SYSTEM

Power supply voltage

Frequency

Rating power

Acoustic power output

Current consumed during the conversation

Cooperating grapple

230 V AC / 11,5V AC

50 Hz

4,5 VA

0,6 W

50 – 60 mA

12V AC/500mA max