DOF FREEDOM X5 Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DOF FREEDOM X5. DOF FREEDOM X5 20 pages. Camera moving model scanner

Imprimer la page

User manual

Adjusts the amount of projector light. The more red dots you see, the brighter the

❸

projector light. When scanning, please set the red dot to be very subtle on the

abutment area. It is more convenient to use the Auto Light function, but recommended

to manually adjust the brightness depending on the model characteristics. When you

deselect the Auto Light icon, it changes to manual mode.

Scanning Instructions

Base Model Scan

Position the model correctly on the scanner and proceed with scanning.

❶

Click the scan button to start scanning.

❷

During Base Scan Stage, the teeth surrounding the abutment teeth are scanned.

❸

The abutment scan is performed after the base scan is completed.

The base scan is used to distinguish the adjacent teeth from the abutment teeth after

scanning the abutment teeth.

In the Base Scan Stage, check whether the adjacent tooth contact surface has been

❹

scanned properly, If insufficient, please perform additional scans.

Click!

Scanning Instructions