Dogtra 1900S HANDSFREE Manuel du propriétaire - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dogtra 1900S HANDSFREE. Dogtra 1900S HANDSFREE 20 pages. Training collar.. 1-dog system only

11. Using the Test Light

1. Turn on the receiver/collar by pressing the on/off
button. The indicator light will come on for a moment
then blink once every 5 seconds, showing that the
collar is ready to use (the receiver needs to be charged
if the indicator light is red).
2. Turn the transmitter on by holding down the on/off
button on the right side of the transmitter. The LED will
blink every 5 seconds and the LCD screen will show
the remaining battery life (the transmitter needs to be
charged if there is only 1 bar showing on the battery
icon for the LCD transmitter screen).
3. Place the test light, included in the package contents,
on the contact points as shown in the diagram.
4. Watch the test light as you push the Nick button on the
transmitter. It should light up for just a moment. The
higher the intensity, the brighter the test light will be.
5. Watch the test light as you push the Constant button
on the transmitter. It should light up as long as the
button is pressed. However, as a safety feature, the
receiver/collar will automatically stop the stimulation if
28
the Constant button is pressed for 12 seconds or longer.
6. Turn the Rheostat Dial on the transmitter clockwise
and then counterclockwise. The test light should glow
brighter with higher levels of stimulation and dimmer
with lower levels.
Note: The test light may not be visible if the intensity
level is set below level ten.
29