Dogtra 1900S HANDSFREE 소유자 매뉴얼 - 페이지 15

{카테고리_이름} Dogtra 1900S HANDSFREE에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra 1900S HANDSFREE 20 페이지. Training collar.. 1-dog system only

11. Using the Test Light

1. Turn on the receiver/collar by pressing the on/off

button. The indicator light will come on for a moment

then blink once every 5 seconds, showing that the

collar is ready to use (the receiver needs to be charged

if the indicator light is red).

2. Turn the transmitter on by holding down the on/off

button on the right side of the transmitter. The LED will

blink every 5 seconds and the LCD screen will show

the remaining battery life (the transmitter needs to be

charged if there is only 1 bar showing on the battery

icon for the LCD transmitter screen).

3. Place the test light, included in the package contents,

on the contact points as shown in the diagram.

4. Watch the test light as you push the Nick button on the

transmitter. It should light up for just a moment. The

higher the intensity, the brighter the test light will be.

5. Watch the test light as you push the Constant button

on the transmitter. It should light up as long as the

button is pressed. However, as a safety feature, the

receiver/collar will automatically stop the stimulation if

the Constant button is pressed for 12 seconds or longer.

6. Turn the Rheostat Dial on the transmitter clockwise

and then counterclockwise. The test light should glow

brighter with higher levels of stimulation and dimmer

with lower levels.

Note: The test light may not be visible if the intensity

level is set below level ten.