Dogtra Edge Manuel du propriétaire - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dogtra Edge. Dogtra Edge 20 pages. Remote controlled dog training collars
Également pour Dogtra Edge : Manuel du propriétaire (19 pages), Manuel du produit (14 pages), Manuel du propriétaire (19 pages), Manuel de paramétrage des codes (2 pages)

13. How to attach the belt clip on the EDGE

To attach the included belt clip to the transmitter, follow

the instructions below.

1. Align the belt clip to the grooves on the back of the

transmitter.

2. With a firm grip, screw on the belt clip using the

provided Philips head screws.

Caution

Tighten until firmly in place. Be careful not to over

tighten.

Test for a stimulation using the included test light.

1. Turn on the receiver/collar and the transmitter and place

the test light over the contact points as shown in the

diagram.

2. The test light will illuminate momentarily when the front

transmitter button is pressed on the "N" mode. The light

will stay lit as long as the front transmitter button is

pressed on the "C" mode, up to 12 seconds.

* For more information on the "N" and "C" modes, see

section 2. How the buttons work.

3. When the stimulation dial is turned up, the test light will

emit a brighter light.

NOTE: The test light may not emit a visible light when

the intensity level is set below 10. The test light may be

difficult to see in bright light settings.