Dogtra Edge Manuel du propriétaire - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dogtra Edge. Dogtra Edge 20 pages. Remote controlled dog training collars
Également pour Dogtra Edge : Manuel du propriétaire (19 pages), Manuel du produit (14 pages), Manuel du propriétaire (19 pages), Manuel de paramétrage des codes (2 pages)

15. How to change the battery

(1)

The Dogtra EDGE batteries are user replaceable.

To replace the battery in the transmitter, follow the

instructions below.

1. Begin with the transmitter turned off.

2. Unscrew the two Phillips head screws attached to the

back of the belt clip and remove the belt clip.

* Unscrew the screws with a firm grip, taking extra caution

to not strip the screws.

3. Unscrew the two screws on the back of the transmitter.

* Unscrew the screws with a firm grip, taking extra caution

to not strip the screws.

4. Holding the battery wire, detach the wire from the

battery connector plug(see picture).

5. Holding the battery wire of the new battery, plug the

wire in to the battery connector plug.

Attention The battery wire plug in is indented to fit in

one way to the connector.

6. Check that the battery connector wire is firmly inserted

into the plug. The battery wires must be inside the

battery compartment tucked neatly along the right

side of the battery

(2)

Caution

The battery wires must

be inside the battery

compartment tucked

neatly along the right

side of the battery.

7. Fasten the battery cover and the belt clip back on the

transmitter with the four screws.

Caution

Do not detach the wire

by pulling from the

battery.

Caution

The orange rubber

gasket is important for

the unit to be waterproof

and must be properly

seated in place.