Dogtra YS500 Manuel du propriétaire - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dogtra YS500. Dogtra YS500 8 pages. No bark collar
Également pour Dogtra YS500 : Manuel du produit (14 pages), Manuel du propriétaire (8 pages)

Imprimer la page

SELECTING ON-OFF & INTENSITY

LEVELS.

‐ The dial on the collar is used to turn the "No Bark

Collar" on and off and for selecting the intensity

level.

‐ To turn off the "No Bark Collar", position as shown

above.

(‐ )

Decrease

‐ Level 1 is the lowest setting, while level 7 is the

highest.

‐ By turning the ON/OFF dial clockwise with your

thumbnail, the stimulation intensity increases. The

stimulation decreases when turned counter-

clockwise.

(+)

Increase

NOTICE :

‐ When first using the "Yapper Stopper", it is

recommended that you start with the lowest level.

If the dog continues to bark, gradually increase the

intensity level.

‐ Once the unit activates, it will go into the delay

mode for 15 seconds before activating again. The

reason the unit does this, is to give ample time for

the dog to process the correction before the unit

activates the next time it barks.

CONTACT POINTS

‐ The contact points must always be in contact with the

skin for the unit to function properly.

IMPORTANT : When screwing in the contact points,

tighten them by hand only.