Dogtra YS500 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Dogtra YS500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra YS500 8 페이지. No bark collar
Dogtra YS500에 대해서도 마찬가지입니다: 제품 설명서 (14 페이지), 소유자 매뉴얼 (8 페이지)

Dogtra YS500 소유자 매뉴얼
SELECTING ON-OFF & INTENSITY
LEVELS.
‐ The dial on the collar is used to turn the "No Bark
Collar" on and off and for selecting the intensity
level.
‐ To turn off the "No Bark Collar", position as shown
above.
(‐ )
Decrease
‐ Level 1 is the lowest setting, while level 7 is the
highest.
‐ By turning the ON/OFF dial clockwise with your
thumbnail, the stimulation intensity increases. The
stimulation decreases when turned counter-
clockwise.
(+)
Increase
10
NOTICE :
‐ When first using the "Yapper Stopper", it is
recommended that you start with the lowest level.
If the dog continues to bark, gradually increase the
intensity level.
‐ Once the unit activates, it will go into the delay
mode for 15 seconds before activating again. The
reason the unit does this, is to give ample time for
the dog to process the correction before the unit
activates the next time it barks.

CONTACT POINTS

‐ The contact points must always be in contact with the
skin for the unit to function properly.
IMPORTANT : When screwing in the contact points,
tighten them by hand only.
11