Dogtrace DOG GPS X20 Manuel de l'utilisateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dogtrace DOG GPS X20. Dogtrace DOG GPS X20 19 pages.
Imprimer la page
7 Receiver preparation (handheld device)
7.1 Receiver charging
Receiver contains Li-Pol accumulator. Before first use,
the accumulator must be recharged.
1. Before charging clean the receiver charging contacts
from any dirt. Connect the charging clip to the recei-
ver (see the picture).
2. Connect supply cable to the power adapter and plug
it into the mains.
3. Lines in battery symbol start to show gradually on
LCD.
4. Charging time is approximatelly 3 hours.
5. Accumulator is charged, when the battery symbol is full – see below.
WARNING: Optimal temperature for charging is from 0°C up to 40 °C. Use only the
original power adapter supplied in the packing with the device. Other chargers
could damage the accumulator.
7.2 Receiver accumulator status check
The accumulator status of the receiver is indicated on the battery symbol in the Infor-
mation panel of the receiver - upper display line.
7.3 Receiver setting
Switching receiver ON/OFF – hold the button
To choose the dog, press
To switch ON/OFF the LCD backlight, press shortly
15 minutes, after that it will switch itself off automatically.
7.4 Pairing – coding of transmitter (collar) with receiver (handheld
device)
1. Switch ON the receiver and transmitter, which you need to pair together – switch
OFF other transmitters.
2. Hold the button CODE on the receiver for 2 seconds.
status charge
100%
70%
40%
10%
/
.
receiver
for 2 seconds.
backlight will shine for
11