Dogtrace DOG GPS X20 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Produk Perawatan Hewan Peliharaan Dogtrace DOG GPS X20. Dogtrace DOG GPS X20 19 halaman.

7 Receiver preparation (handheld device)

Receiver contains Li-Pol accumulator. Before first use,

the accumulator must be recharged.

1. Before charging clean the receiver charging contacts

from any dirt. Connect the charging clip to the recei-

ver (see the picture).

2. Connect supply cable to the power adapter and plug

it into the mains.

3. Lines in battery symbol start to show gradually on

LCD.

4. Charging time is approximatelly 3 hours.

5. Accumulator is charged, when the battery symbol is full – see below.

WARNING: Optimal temperature for charging is from 0°C up to 40 °C. Use only the

original power adapter supplied in the packing with the device. Other chargers

could damage the accumulator.

The accumulator status of the receiver is indicated on the battery symbol in the Infor-

mation panel of the receiver - upper display line.

Switching receiver ON/OFF – hold the button

To choose the dog, press

To switch ON/OFF the LCD backlight, press shortly

15 minutes, after that it will switch itself off automatically.

7.4 Pairing – coding of transmitter (collar) with receiver (handheld

device)

1. Switch ON the receiver and transmitter, which you need to pair together – switch

OFF other transmitters.

2. Hold the button CODE on the receiver for 2 seconds.

status charge

100%

70%

40%

10%

receiver

for 2 seconds.

backlight will shine for