ASG X-PAQ ASG-NW2500-EIP Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ASG X-PAQ ASG-NW2500-EIP. ASG X-PAQ ASG-NW2500-EIP 15 pages. Ethernet ip network communication module
Imprimer la page
Programming the Gateway:
Pressing the enter key will allow the user to save the gateway's IP address that is
displayed on the LCD. The escape key can be pressed any time during the editing
process allowing the user to return to the main menu without saving a new value.
For a new Gateway to take effect, the unit's power must be cycled off and then back
on.
Programming the Connection Type:
Gateways perform routing functions. This gateway value identi-
fies the router that connects a LAN to other networks. Some
gateways also perform protocol conversions.
In order to edit this gateway's IP address, select Gateway from
the main menu and press enter.
The current gateway address will be displayed at this point. In
order to change the address use the LEFT and RIGHT arrow
keys to select any given digit in the address and then use the
UP and DOWN keys to alter that digit's value.
The IP Address assigned to this unit.
The current timeout value (in seconds) will be displayed at this point.
In order to change the value the arrow keys may be pressed. The UP
key will add one second, DOWN will subtract a second, RIGHT will
add 10 seconds, and LEFT will subtract 10 seconds from the value.
Pressing the enter key will allow the user to save the value that is dis-
played on the LCD. The escape key can be pressed any time during
the editing process allowing the user to return to the main menu
without saving.
10