ASG X-PAQ ASG-NW2500-EIP 사용자 설명서 - 페이지 10

{카테고리_이름} ASG X-PAQ ASG-NW2500-EIP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ASG X-PAQ ASG-NW2500-EIP 15 페이지. Ethernet ip network communication module

Programming the Gateway:

Pressing the enter key will allow the user to save the gateway's IP address that is

displayed on the LCD. The escape key can be pressed any time during the editing

process allowing the user to return to the main menu without saving a new value.

For a new Gateway to take effect, the unit's power must be cycled off and then back

on.

Programming the Connection Type:

Gateways perform routing functions. This gateway value identi-

fies the router that connects a LAN to other networks. Some

gateways also perform protocol conversions.

In order to edit this gateway's IP address, select Gateway from

the main menu and press enter.

The current gateway address will be displayed at this point. In

order to change the address use the LEFT and RIGHT arrow

keys to select any given digit in the address and then use the

UP and DOWN keys to alter that digit's value.

The IP Address assigned to this unit.

The current timeout value (in seconds) will be displayed at this point.

In order to change the value the arrow keys may be pressed. The UP

key will add one second, DOWN will subtract a second, RIGHT will

add 10 seconds, and LEFT will subtract 10 seconds from the value.

Pressing the enter key will allow the user to save the value that is dis-

played on the LCD. The escape key can be pressed any time during

the editing process allowing the user to return to the main menu

without saving.