CYP CSC-200P Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CYP CSC-200P. CYP CSC-200P 12 pages. Video to pc/hdtv scaler

Imprimer la page

(4). Connecting the hardware

The video scaler is controlled via front panel push buttons or remote control and its

status is indicated by OSD display. The front panel controls are shown below.

Front Panel

CSC-200P

VIDEO to PC/HDTV SCALER

Front Panel

1. Mode: Press the button repeatedly will toggle through the following adjust controls:

Source ResolutionOutput Aspect3D EnhanceDigital NRSources....

Source mode: While under this mode, press  or  button to choose your

Resolution mode: If output is selected as RGB, press  or button to choose

Output mode: Press  or to select between PC RGB output and HDTV

Aspect mode: Press  or to choose between standard, 4:3 aspect and

3D Enchance mode: To turn on or off the 3D comb filter function.

Digital NR mode: To turn on or turn off the digital noise reduction function.

desired input source from Video, S-Video, or Component inputs.

from 640 x 480(VGA), 800 x 600 (SVGA), 1024 x 768(XGA),

or 1280 x 1024(SXGA) PC output. If output is selected as

YPbPr press  or to choose from 480p, 576p,720P

or 1080i HDTV output.

YPbPr output.

wide(16:9) aspect ratio.

Power

1 1

Mode



Picture

