CYP CSC-200P Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CYP CSC-200P. CYP CSC-200P 12 pages. Video to pc/hdtv scaler
Imprimer la page
(4). Connecting the hardware
Front Panel
2. Picture: Press the button to toggle through picture adjust parameters as follows:
ContrastBright Color Tint Sharpness Contrast
Contrast: Press or to adjust contrast level. The range of adjustment is 0~63.
Factory default value is 58.
Bright: Press or to adjust Brightness level. The range of adjustment is 0~63.
Factory default value is 31.
Color: Press or to adjust color level. The range of adjustment is 0~63.
Factory default value is 31.
Tint: Press or to adjust NTSC Tint level. The range of adjustment is 0~63.
Factory defaults value is 31.
Sharpness: Press or to adjust sharpness level.
3. , : Press to toggle through various adjust controls or to alter setting value.
4. IR Sensor: Infrared remote control sensor.
5. Power and LED button: Press once to power on the unit, press again to turn off.
Note:
* Under picture adjust mode, press and simutaneously will revert the selected
parameter back to factory preset value. Press both buttons for over 5 seconds.
will revert all picture parameters back to their factory preset values.
* You can use RS-232 to lockout the front panel controls. To lift this lockout
and revert all parameters back to factory preset value, please press"mode"
and "picture" buttons simultaneously for over 10 seconds.
6. Front Panel Lockout- Under certain circumstances it may be desirable to disable
The range of adjustment is 0~63. Factory defaults at 10.
the front panel controls. For example, to prevent
unauthorized or accidental changes to the setting while the
unit is in use.
To disable the front panel controls use RS-232 to set the
front panel lockout to ON position.
3