CYP CSC-200P Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Konverter Media CYP CSC-200P. CYP CSC-200P 12 halaman. Video to pc/hdtv scaler

(4). Connecting the hardware

Front Panel

2. Picture: Press the button to toggle through picture adjust parameters as follows:

ContrastBright  Color Tint Sharpness Contrast

Contrast: Press  or  to adjust contrast level. The range of adjustment is 0~63.

Factory default value is 58.

Bright: Press  or  to adjust Brightness level. The range of adjustment is 0~63.

Factory default value is 31.

Color: Press  or  to adjust color level. The range of adjustment is 0~63.

Factory default value is 31.

Tint: Press  or  to adjust NTSC Tint level. The range of adjustment is 0~63.

Factory defaults value is 31.

Sharpness: Press  or  to adjust sharpness level.

3.  ,  : Press to toggle through various adjust controls or to alter setting value.

4. IR Sensor: Infrared remote control sensor.

5. Power and LED button: Press once to power on the unit, press again to turn off.

Note:

* Under picture adjust mode, press  and simutaneously will revert the selected

parameter back to factory preset value. Press both buttons for over 5 seconds.

will revert all picture parameters back to their factory preset values.

* You can use RS-232 to lockout the front panel controls. To lift this lockout

and revert all parameters back to factory preset value, please press"mode"

and "picture" buttons simultaneously for over 10 seconds.

6. Front Panel Lockout- Under certain circumstances it may be desirable to disable

The range of adjustment is 0~63. Factory defaults at 10.

the front panel controls. For example, to prevent

unauthorized or accidental changes to the setting while the

unit is in use.

To disable the front panel controls use RS-232 to set the

front panel lockout to ON position.