Doka 586231000 Mode d'emploi original - Page 4

Parcourez en ligne ou téléchargez le pdf Mode d'emploi original pour {nom_de_la_catégorie} Doka 586231000. Doka 586231000 5 pages. Dokamatic lifting strap 13.00m

Imprimer la page
Lifting of stacks
with strap shoes
To lift stacked tableform superstructures, the Doka-
matic lifting strap 13.00m is used with integrated
strap shoes.
▪
Dokamatic table
▪
Dokaflex table
NOTICE
Risk of damage to the bottom table if the Lifting
strap is used without strap shoes.
Max. number of elements in stack:
Dokamatic table
6 elements
Dokamatic S table
4 elements
Dokaflex table
5 elements
NOTICE
The strap shoes must always be mounted to
the 2nd secondary beam from the edge of the
element.
➤
Push the strap shoes of the Dokamatic lifting strap
onto the secondary beam, firmly and completely.
1
2
A Dokamatic lifting strap 13.00m
B Strap shoe
Both strap shoes must be mounted to oppo-
site ends of the same formwork beam!
➤
Mount the strap shoes of the second lifting strap in
the same way.
4
9767-281-01
A
B
9767-266-01
Original Operating Instructions Dokamatic lifting strap 13.00m
NOTICE
With custom tables, allowance must be made
for the following points:
▪
secondary beams may cantilever out further
▪
greater weight
▪
oblique pull of the lifting strap
Reinforce the secondary beams by e.g. nail-
ing on a strip of formwork sheeting.
without strap shoes
To lift e.g. stacked Framax panels, the Dokamatic lift-
ing strap 13.00m is used without strap shoes.
▪
Framax panel
▪
Frami panel
▪
Formwork element FF20
▪
FF100 tec element
▪
Frame Xbright
9764-235-01
WARNING
➤
The Lifting straps 13.00 m may only be used
as shown here if there is no risk of the straps
sliding towards one another, or of the load
being displaced.
999265002 - 12/2017
9767-349-01