Ash Technologies Prisma AF Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ash Technologies Prisma AF. Ash Technologies Prisma AF 12 pages.

switch to photo setting when in mirror mode and
switch back to the last reading mode when returned
to the reading position. You should try to keep the
Prisma AF close to the TV screen for ease of use.

Focus lock

Press Mode and Overview simultaneously to turn off
the autofocus facility. Repeat to re-enable autofocus.

Lighting on/off

If you wish to turn off the LED lighting then, with the
unit powered off, press Zoom Up and power the unit
on. Repeat to allow the lighting to function again.

Sound on/off

The sounds can be disabled by Pressing Zoom
Down while powering on the unit. Repeat to enable
the sounds again.

Factory defaults

Press Mode while powering-on the Prisma AF to
restore factory settings for sound, lighting and
brightness settings.

Taking Care of your Prisma AF

Do not touch the lens. Dirt on the lens will appear as
a blurred or dim image or as fuzzy spots on the
screen. If you believe the lens is dirty, it can be
cleaned with a soft, dry cloth applying minimal
pressure. As the lens is polished and coated, do not
use a wet or coarse cloth, avoid detergents and
abrasive substances or solvents to clean it.
Page 9
Prisma AF English Rev 1.00